| Motorcycles and Twowheelers: Bike maintenance - "Motorcycle Maintenance Tips: Oil!" Saturday, 4 September, 2010 | Home | Suggest a Link |
We support this site using affiliate marketing as a way to earn revenue. All the ads, and many of the links mentioning other products, services, or websites are special links that earn us a commission when you use or pay for their product/service.
Please do not use our site if this alarms you.
Do just about anything to your motorcycle, but forget the most basic and fundamental additive - Oil - and your wallet could be hanging loose for a long time.
How often you change the oil, the level you fill it up to and the kind of oil you use all make the difference between a bike that lasts and a bike that doesn't!
These are a few of the most basic tips when it comes to oil and motorcycles...
Over time and with prolonged use the integrity of the oil breaks down. Varies forces at work within the engine actually tear away at the very molecules of the oil, so the old oil must be periodically replaced every 2-3 thousand kilometres.
Smaller motorcycles run hotter than bigger bikes, so their oil needs to be replaced more frequently.
Motorcycle Maintenance Tips for Changing Oil:
New motorcycles require a little more care when it comes to oil. The surfaces inside of the new engine are quite rough and require time to wear smooth. The particles of metal released during this process need to be flushed out of the engine, so halve the normal oil change intervals for the first two changes.
The benefits of oil additives sound good, especially when you've bought a used motorcycle...
The stories mechanics tell you vary. Some good, some bad! However, never use additives on a new motorcycle as this will prolong the running in process.
That's about all. These are only a few of the basics when it comes to oil and your motorcycle. Know your bike and you'll discover its exact requirements.
There is much to learn about motorcycle spark plugs. Actually, there is more than meets the eyes.
First, let us distinguish the important difference in spark plugs' threaded ends. They come in four diameters and lengths. They come in nominal 14, 10, 12 and 18 millimeters diameters. previously, there was a slight difference in thread configuration especially in different countries. However, the international standardization of the thread forms made it uniform. These new dimensions are now being followed by motorcycle parts manufacturers.
There can be lots of error in selecting the best motorcycle
parts, especially in the case of spark plugs. The very usual
error is using ¾-inch plugs in ½-inch
Read this article in full
The amp/hour (AH) capacity is the basis for rating motorcycle batteries. For example, a 12AH battery can produce one amp of current flow for 12 hours, or two amps for six hours. In order to calculate the amount of time needed to use up a fully charged motorcycle battery by turning the lights on, we have to take power in watts, and divide it by voltage, which gives us the current draw in Amps. Therefore, a 72 watts beam and tail together, divided by 12 volts equals a 6-amp draw. So in 2 hours, the 12AH
Read this article in full
You may ask yourself, what is a motorcycle fork stabilizer and why do I need one for my motorcycle? These are very reasonable questions to ask, especially since you have expected the motorcycle manufacturer to have given your motorcycle the highest performance suspension components available. I hope to answer these questions and many more within this motorcycle fork stabilizer article.
I first became aware of motorcycle fork stabilizers from the
Cycle Solutions (www.CycleSolutions.net) motorcycle
forums. Several members of the forum suggested that this was an
aftermarket part to install on your motorcycle. Being both
curious and ignorant I asked questions. Is this
Read this article in full
I strongly believe that knowledge is power. Especially when it comes to motorcycle maintenance. Why go to the stress and expense of having your local motorcycle shop perform your maintenance and upgrades when you can learn to do it yourself? And you know that if you do your own maintenance, that you will give the extra attention required to do a competent job. I doubt you can say the same for the underpaid and over-worked motorcycle service mechanic.
The other benefit of doing your own
motorcycle maintenance is that you learn more about your bike.
This has many benefits. You will be able to tell when
Read this article in full
Part and parcel of owning a bike is maintaining its appearance and its capability. Nevertheless, despite making sure that the parts and cables of the motorcycle give us maximum service, we cannot but accept that they have their own warranties and lifetimes.
Unlike artwork or antiques, motorcycles are made to be used and abused. With all the elements found in the environment, a motorcycle part will definitely have its final day. When that day comes and you don't have enough money to buy new ones, why not settle for used motorcycle parts, e.g. cables? With a little tinkering and proper installation,
Read this article in full
![]() | ![]() | ![]() | ![]() | ![]() |